4 - compatible: should be one or more of
5 "brcm,bcm7425-sata-phy"
6 "brcm,bcm7445-sata-phy"
7 "brcm,iproc-ns2-sata-phy"
8 "brcm,iproc-nsp-sata-phy"
10 "brcm,iproc-sr-sata-phy"
11 "brcm,bcm63138-sata-phy"
12 - address-cells: should be 1
13 - size-cells: should be 0
14 - reg: register ranges for the PHY PCB interface
15 - reg-names: should be "phy" and "phy-ctrl"
16 The "phy-ctrl" registers are only required for
17 "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy".
20 Each port's PHY should be represented as a sub-node.
22 Sub-nodes required properties:
24 - phy-cells: generic PHY binding; must be 0
26 Sub-nodes optional properties:
27 - brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
28 This property is not applicable for "brcm,iproc-ns2-sata-phy",
29 "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
31 - brcm,rxaeq-mode: string that indicates the desired RX equalizer
32 mode, possible values are:
33 "off" (equivalent to not specifying the property)
35 "manual" (brcm,rxaeq-value is used in that case)
37 - brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX
38 equalizer value that should be used. Allowed range is 0..63.
42 compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
43 reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;