1 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
4 $id: http://devicetree.org/schemas/net/qcom,ipa.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm IP Accelerator (IPA)
10 - Alex Elder <elder@kernel.org>
13 This binding describes the Qualcomm IPA. The IPA is capable of offloading
14 certain network processing tasks (e.g. filtering, routing, and NAT) from
17 The IPA sits between multiple independent "execution environments,"
18 including the Application Processor (AP) and the modem. The IPA presents
19 a Generic Software Interface (GSI) to each execution environment.
20 The GSI is an integral part of the IPA, but it is logically isolated
21 and has a distinct interrupt and a separately-defined address space.
23 See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt. See
24 iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU
31 | AP +<---. .----+ Modem |
34 -------- | | | | ---------
60 - const: qcom,sm8550-ipa
64 - description: IPA registers
65 - description: IPA shared memory
66 - description: GSI registers
86 - description: IPA interrupt (hardware IRQ)
87 - description: GSI interrupt (hardware IRQ)
88 - description: Modem clock query interrupt (smp2p interrupt)
89 - description: Modem setup ready interrupt (smp2p interrupt)
95 - const: ipa-clock-query
96 - const: ipa-setup-ready
101 - description: Path leading to system memory
102 - description: Path between the AP and IPA config space
104 - description: Path leading to system memory
105 - description: Path leading to internal memory
106 - description: Path between the AP and IPA config space
119 $ref: /schemas/types.yaml#/definitions/phandle
120 description: phandle to the AOSS side-channel message RAM
123 $ref: /schemas/types.yaml#/definitions/phandle-array
124 description: State bits used in by the AP to signal the modem.
126 - description: Whether the "ipa-clock-enabled" state bit is valid
127 - description: Whether the IPA clock is enabled (if valid)
129 qcom,smem-state-names:
130 description: The names of the state bits used for SMP2P output
132 - const: ipa-clock-enabled-valid
133 - const: ipa-clock-enabled
141 Indicates how GSI firmware should be loaded. If the AP loads
142 and validates GSI firmware, this property has value "self".
143 If the modem does this, this property has value "modem".
144 Otherwise, "skip" means GSI firmware loading is not required.
150 This is the older (deprecated) way of indicating how GSI firmware
151 should be loaded. If present, the modem loads GSI firmware; if
152 absent, the AP loads GSI firmware.
157 If present, a phandle for a reserved memory area that holds
158 the firmware passed to Trust Zone for authentication. Required
159 when the AP (not the modem) performs early initialization.
164 If present, name (or relative path) of the file within the
165 firmware search path containing the firmware image used when
166 initializing IPA hardware. Optional, and only used when
167 Trust Zone performs early initialization.
179 # If qcom,gsi-loader is present, modem-init must not be present
187 # If qcom,gsi-loader is "self", the AP loads GSI firmware, and
188 # memory-region must be specified
198 # If qcom,gsi-loader is not present, we use deprecated behavior.
199 # If modem-init is not present, the AP loads GSI firmware, and
200 # memory-region must be specified.
209 additionalProperties: false
213 #include <dt-bindings/interrupt-controller/arm-gic.h>
214 #include <dt-bindings/clock/qcom,rpmh.h>
215 #include <dt-bindings/interconnect/qcom,sdm845.h>
218 compatible = "qcom,smp2p";
219 interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
220 mboxes = <&apss_shared 6>;
221 qcom,smem = <94>, <432>;
222 qcom,local-pid = <0>;
223 qcom,remote-pid = <5>;
225 ipa_smp2p_out: ipa-ap-to-modem {
226 qcom,entry-name = "ipa";
227 #qcom,smem-state-cells = <1>;
230 ipa_smp2p_in: ipa-modem-to-ap {
231 qcom,entry-name = "ipa";
232 interrupt-controller;
233 #interrupt-cells = <2>;
238 compatible = "qcom,sc7180-ipa";
240 qcom,gsi-loader = "self";
241 memory-region = <&ipa_fw_mem>;
242 firmware-name = "qcom/sc7180-trogdor/modem/modem.mdt";
244 iommus = <&apps_smmu 0x440 0x0>,
245 <&apps_smmu 0x442 0x0>;
246 reg = <0x1e40000 0x7000>,
249 reg-names = "ipa-reg",
253 interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
254 <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
255 <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
256 <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
257 interrupt-names = "ipa",
262 clocks = <&rpmhcc RPMH_IPA_CLK>;
263 clock-names = "core";
266 <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
267 <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
268 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
269 interconnect-names = "memory",
273 qcom,qmp = <&aoss_qmp>;
275 qcom,smem-states = <&ipa_smp2p_out 0>,
277 qcom,smem-state-names = "ipa-clock-enabled-valid",