1 * Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
3 DA9093 consists of a large and varied group of sub-devices (I2C Only):
5 Device Supply Names Description
6 ------ ------------ -----------
7 da9063-regulator : : LDOs & BUCKs
8 da9063-onkey : : On Key
9 da9063-rtc : : Real-Time Clock (DA9063 only)
10 da9063-watchdog : : Watchdog
16 - compatible : Should be "dlg,da9063" or "dlg,da9063l"
17 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
18 modified to match the chip's OTP settings).
19 - interrupt-parent : Specifies the reference to the interrupt controller for
21 - interrupts : IRQ line information.
22 - interrupt-controller
26 - regulators : This node defines the settings for the LDOs and BUCKs.
27 The DA9063(L) regulators are bound using their names listed below:
35 ldo1 : LDO_1 (DA9063 only)
36 ldo2 : LDO_2 (DA9063 only)
38 ldo4 : LDO_4 (DA9063 only)
39 ldo5 : LDO_5 (DA9063 only)
40 ldo6 : LDO_6 (DA9063 only)
44 ldo10 : LDO_10 (DA9063 only)
47 The component follows the standard regulator framework and the bindings
48 details of individual regulator device can be found in:
49 Documentation/devicetree/bindings/regulator/regulator.txt
51 - rtc : This node defines settings for the Real-Time Clock associated with
52 the DA9063 only. The RTC is not present in DA9063L. There are currently
53 no entries in this binding, however compatible = "dlg,da9063-rtc" should
54 be added if a node is created.
56 - onkey : This node defines the OnKey settings for controlling the key
57 functionality of the device. The node should contain the compatible property
58 with the value "dlg,da9063-onkey".
60 Optional onkey properties:
62 - dlg,disable-key-power : Disable power-down using a long key-press. If this
63 entry exists the OnKey driver will remove support for the KEY_POWER key
64 press. If this entry does not exist then by default the key-press
65 triggered power down is enabled and the OnKey will support both KEY_POWER
68 - watchdog : This node defines settings for the Watchdog timer associated
69 with the DA9063 and DA9063L. There are currently no entries in this
70 binding, however compatible = "dlg,da9063-watchdog" should be added
77 compatible = "dlg,da9063"
79 interrupt-parent = <&gpio6>;
80 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
84 compatible = "dlg,da9063-rtc";
88 compatible = "dlg,da9063-watchdog";
92 compatible = "dlg,da9063-onkey";
93 dlg,disable-key-power;
97 DA9063_BCORE1: bcore1 {
98 regulator-name = "BCORE1";
99 regulator-min-microvolt = <300000>;
100 regulator-max-microvolt = <1570000>;
101 regulator-min-microamp = <500000>;
102 regulator-max-microamp = <2000000>;
105 DA9063_LDO11: ldo11 {
106 regulator-name = "LDO_11";
107 regulator-min-microvolt = <900000>;
108 regulator-max-microvolt = <3600000>;