ARM: dts: kirkwood: ReadyNAS NV+v2: Add LCD panel
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / input / touchscreen / edt-ft5x06.yaml
1 # SPDX-License-Identifier: GPL-2.0
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: FocalTech EDT-FT5x06 Polytouch Bindings
8
9 description: |
10              There are 5 variants of the chip for various touch panel sizes
11               FT5206GE1  2.8" .. 3.8"
12               FT5306DE4  4.3" .. 7"
13               FT5406EE8  7"   .. 8.9"
14               FT5506EEG  7"   .. 8.9"
15               FT5726NEI  5.7” .. 11.6"
16
17 maintainers:
18   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
19
20 allOf:
21   - $ref: touchscreen.yaml#
22   - if:
23      properties:
24        compatible:
25          contains:
26            enum:
27              - evervision,ev-ft5726
28
29     then:
30       properties:
31         offset-x: true
32         offset-y: true
33
34 properties:
35   compatible:
36     enum:
37       - edt,edt-ft5206
38       - edt,edt-ft5306
39       - edt,edt-ft5406
40       - edt,edt-ft5506
41       - evervision,ev-ft5726
42       - focaltech,ft6236
43
44   reg:
45     const: 0x38
46
47   interrupts:
48     maxItems: 1
49
50   reset-gpios:
51     maxItems: 1
52
53   wake-gpios:
54     maxItems: 1
55
56   wakeup-source: true
57
58   vcc-supply:
59     maxItems: 1
60
61   gain:
62     description: Allows setting the sensitivity in the range from 0 to 31.
63                  Note that lower values indicate higher sensitivity.
64     allOf:
65       - $ref: /schemas/types.yaml#/definitions/uint32
66       - minimum: 0
67       - maximum: 31
68
69   offset:
70     description: Allows setting the edge compensation in the range from 0 to 31.
71     allOf:
72       - $ref: /schemas/types.yaml#/definitions/uint32
73       - minimum: 0
74       - maximum: 31
75
76   offset-x:
77     description: Same as offset, but applies only to the horizontal position.
78                  Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
79     allOf:
80       - $ref: /schemas/types.yaml#/definitions/uint32
81       - minimum: 0
82       - maximum: 80
83
84   offset-y:
85     description: Same as offset, but applies only to the vertical position.
86                  Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
87     allOf:
88       - $ref: /schemas/types.yaml#/definitions/uint32
89       - minimum: 0
90       - maximum: 80
91
92   touchscreen-size-x: true
93   touchscreen-size-y: true
94   touchscreen-fuzz-x: true
95   touchscreen-fuzz-y: true
96   touchscreen-inverted-x: true
97   touchscreen-inverted-y: true
98   touchscreen-swapped-x-y: true
99   interrupt-controller: true
100
101 additionalProperties: false
102
103 required:
104   - compatible
105   - reg
106   - interrupts
107
108 examples:
109   - |
110     #include <dt-bindings/gpio/gpio.h>
111     #include <dt-bindings/interrupt-controller/arm-gic.h>
112     i2c@00000000 {
113       #address-cells = <1>;
114       #size-cells = <0>;
115       edt-ft5x06@38 {
116         compatible = "edt,edt-ft5406";
117         reg = <0x38>;
118         interrupt-parent = <&gpio2>;
119         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
120         reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
121         wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
122       };
123     };
124
125 ...