Documentation/devicetree/bindings/input/cypress,cyapa.txt

   1 Cypress I2C Touchpad
   2
   3 Required properties:
   4 - compatible: must be "cypress,cyapa".
   5 - reg: I2C address of the chip.
   6 - interrupts: interrupt to which the chip is connected (see interrupt
   7         binding[0]).
   8
   9 Optional properties:
  10 - wakeup-source: touchpad can be used as a wakeup source.
  11 - pinctrl-names: should be "default" (see pinctrl binding [1]).
  12 - pinctrl-0: a phandle pointing to the pin settings for the device (see
  13         pinctrl binding [1]).
  14 - vcc-supply: a phandle for the regulator supplying 3.3V power.
  15
  16 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
  17 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
  18
  19 Example:
  20         &i2c0 {
  21                 /* ... */
  22
  23                 /* Cypress Gen3 touchpad */
  24                 touchpad@67 {
  25                         compatible = "cypress,cyapa";
  26                         reg = <0x67>;
  27                         interrupt-parent = <&gpio>;
  28                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
  29                         wakeup-source;
  30                 };
  31
  32                 /* Cypress Gen5 and later touchpad */
  33                 touchpad@24 {
  34                         compatible = "cypress,cyapa";
  35                         reg = <0x24>;
  36                         interrupt-parent = <&gpio>;
  37                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
  38                         wakeup-source;
  39                 };
  40
  41                 /* ... */
  42         };