1 * AMS/TAOS ALS and proximity sensor
5 - compatible: Should be one of
17 - reg: the I2C address of the device
21 - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1>
22 are the only valid values.
23 - led-max-microamp - current for the proximity LED. Must be 100000, 50000,
25 - vdd-supply: phandle to the regulator that provides power to the sensor.
26 - vddio-supply: phandle to the regulator that provides power to the bus.
27 - interrupts: the sole interrupt generated by the device
29 Refer to interrupt-controller/interrupts.txt for generic interrupt client
35 compatible = "amstaos,tsl2772";
37 interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
38 vdd-supply = <&pm8941_l17>;
39 vddio-supply = <&pm8941_lvs1>;
40 amstaos,proximity-diodes = <0>;
41 led-max-microamp = <100000>;