1 * Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor
3 https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
4 http://omapworld.com/BMA180_111_1002839.pdf
5 http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
9 - compatible : should be one of:
16 - reg : the I2C address of the sensor
17 - vdd-supply : regulator phandle connected to the VDD pin
18 - vddio-supply : regulator phandle connected to the VDDIO pin
22 - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
23 flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
24 For the bma250 the first interrupt listed must be the one
25 connected to the INT1 pin, the second (optional) interrupt
26 listed must be the one connected to the INT2 pin.
31 compatible = "bosch,bma180";
33 interrupt-parent = <&gpio6>;
34 interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;