1 Rockchip specific extensions to the Synopsys Designware MIPI DSI
2 ================================
5 - #address-cells: Should be <1>.
6 - #size-cells: Should be <0>.
8 "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
9 "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
10 "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
11 - reg: Represent the physical address range of the controller.
12 - interrupts: Represent the controller's interrupt to the CPU(s).
13 - clocks, clock-names: Phandles to the controller's pll reference
14 clock(ref) when using an internal dphy and APB clock(pclk).
15 For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
16 are required. As described in [1].
17 - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
18 - ports: contain a port node with endpoint definitions as defined in [2].
19 For vopb,set the reg = <0> and set the reg = <1> for vopl.
20 - video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
21 - video port 1 for either a panel or subsequent encoder
24 - phys: from general PHY binding: the phandle for the PHY device.
25 - phy-names: Should be "dphy" if phys references an external phy.
26 - #phy-cells: Defined when used as ISP phy, should be 0.
27 - power-domains: a phandle to mipi dsi power domain node.
28 - resets: list of phandle + reset specifier pairs, as described in [3].
29 - reset-names: string reset name, must be "apb".
31 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
32 [2] Documentation/devicetree/bindings/media/video-interfaces.txt
33 [3] Documentation/devicetree/bindings/reset/reset.txt
36 mipi_dsi: mipi@ff960000 {
39 compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
40 reg = <0xff960000 0x4000>;
41 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
42 clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
43 clock-names = "ref", "pclk";
44 resets = <&cru SRST_MIPIDSI0>;
46 rockchip,grf = <&grf>;
57 mipi_in_vopb: endpoint@0 {
59 remote-endpoint = <&vopb_out_mipi>;
61 mipi_in_vopl: endpoint@1 {
63 remote-endpoint = <&vopl_out_mipi>;
72 mipi_out_panel: endpoint {
73 remote-endpoint = <&panel_in_mipi>;
79 compatible ="boe,tv080wum-nl0";
82 enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
83 pinctrl-names = "default";
84 pinctrl-0 = <&lcd_en>;
85 backlight = <&backlight>;
88 panel_in_mipi: endpoint {
89 remote-endpoint = <&mipi_out_panel>;