1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
10 - Vinod Koul <vkoul@kernel.org>
13 The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
32 description: GPIO connected to active high RESET pin.
35 description: Regulator for 1.8V MIPI phy power.
38 description: Regulator for 3.3V IO power.
41 $ref: /schemas/graph.yaml#/properties/ports
45 $ref: /schemas/graph.yaml#/properties/port
47 Primary MIPI port-1 for MIPI input
50 $ref: /schemas/graph.yaml#/properties/port
52 Additional MIPI port-2 for MIPI input, used in combination
53 with primary MIPI port-1 to drive higher resolution displays
56 $ref: /schemas/graph.yaml#/properties/port
58 HDMI port for HDMI output
72 additionalProperties: false
76 #include <dt-bindings/gpio/gpio.h>
77 #include <dt-bindings/interrupt-controller/irq.h>
84 compatible = "lontium,lt9611";
87 reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
88 interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
90 vdd-supply = <<9611_1v8>;
91 vcc-supply = <<9611_3v3>;
100 remote-endpoint = <&dsi0_out>;
107 remote-endpoint = <&dsi1_out>;
113 lt9611_out: endpoint {
114 remote-endpoint = <&hdmi_con>;