1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Lontium LT9611 2 Port MIPI to HDMI Bridge
10 - Vinod Koul <vkoul@kernel.org>
13 The LT9611 is a bridge device which converts DSI to HDMI
31 description: GPIO connected to active high RESET pin.
34 description: Regulator for 1.8V MIPI phy power.
37 description: Regulator for 3.3V IO power.
52 Primary MIPI port-1 for MIPI input
61 additionalProperties: false
65 $ref: /schemas/types.yaml#/definitions/phandle
73 Additional MIPI port-2 for MIPI input, used in combination
74 with primary MIPI port-1 to drive higher resolution displays
83 additionalProperties: false
87 $ref: /schemas/types.yaml#/definitions/phandle
95 HDMI port for HDMI output
102 "^endpoint(@[0-9])$":
104 additionalProperties: false
108 $ref: /schemas/types.yaml#/definitions/phandle
127 additionalProperties: false
131 #include <dt-bindings/gpio/gpio.h>
132 #include <dt-bindings/interrupt-controller/irq.h>
135 #address-cells = <1>;
139 compatible = "lontium,lt9611";
142 reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
143 interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
145 vdd-supply = <<9611_1v8>;
146 vcc-supply = <<9611_3v3>;
149 #address-cells = <1>;
155 remote-endpoint = <&dsi0_out>;
162 remote-endpoint = <&dsi1_out>;
168 lt9611_out: endpoint {
169 remote-endpoint = <&hdmi_con>;