7 cgroup subsys "blkio" implements the block io controller. There seems to be
8 a need of various kinds of IO control policies (like proportional BW, max BW)
9 both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
10 Plan is to use the same cgroup based management interface for blkio controller
11 and based on user options switch IO policies in the background.
13 One IO control policy is throttling policy which can be used to
14 specify upper IO rate limits on devices. This policy is implemented in
15 generic block layer and can be used on leaf nodes as well as higher
16 level logical devices like device mapper.
21 Throttling/Upper Limit policy
22 -----------------------------
23 Enable Block IO controller::
27 Enable throttling in block layer::
29 CONFIG_BLK_DEV_THROTTLING=y
31 Mount blkio controller (see cgroups.txt, Why are cgroups needed?)::
33 mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
35 Specify a bandwidth rate on particular device for root group. The format
36 for policy is "<major>:<minor> <bytes_per_second>"::
38 echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
40 This will put a limit of 1MB/second on reads happening for root group
41 on device having major/minor number 8:16.
43 Run dd to read a file and see if rate is throttled to 1MB/s or not::
45 # dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
48 4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
50 Limits for writes can be put using blkio.throttle.write_bps_device file.
55 Throttling implements hierarchy support; however,
56 throttling's hierarchy support is enabled iff "sane_behavior" is
57 enabled from cgroup side, which currently is a development option and
58 not publicly available.
60 If somebody created a hierarchy like as follows::
68 Throttling with "sane_behavior" will handle the
69 hierarchy correctly. For throttling, all limits apply
70 to the whole subtree while all statistics are local to the IOs
71 directly generated by tasks in that cgroup.
73 Throttling without "sane_behavior" enabled from cgroup side will
74 practically treat all groups at same level as if it looks like the
79 root test1 test2 test3
81 Various user visible config options
82 ===================================
87 CONFIG_BFQ_CGROUP_DEBUG
88 Debug help. Right now some additional stats file show up in cgroup
89 if this option is enabled.
91 CONFIG_BLK_DEV_THROTTLING
92 Enable block device throttling support in block layer.
94 Details of cgroup files
95 =======================
97 Proportional weight policy files
98 --------------------------------
101 Specifies per cgroup weight. This is default weight of the group
102 on all the devices until and unless overridden by per device rule
103 (see `blkio.bfq.weight_device` below).
105 Currently allowed range of weights is from 1 to 1000. For more details,
106 see Documentation/block/bfq-iosched.rst.
108 blkio.bfq.weight_device
109 Specifes per cgroup per device weights, overriding the default group
110 weight. For more details, see Documentation/block/bfq-iosched.rst.
112 Following is the format::
114 # echo dev_maj:dev_minor weight > blkio.bfq.weight_device
116 Configure weight=300 on /dev/sdb (8:16) in this cgroup::
118 # echo 8:16 300 > blkio.bfq.weight_device
119 # cat blkio.bfq.weight_device
123 Configure weight=500 on /dev/sda (8:0) in this cgroup::
125 # echo 8:0 500 > blkio.bfq.weight_device
126 # cat blkio.bfq.weight_device
131 Remove specific weight for /dev/sda in this cgroup::
133 # echo 8:0 0 > blkio.bfq.weight_device
134 # cat blkio.bfq.weight_device
139 Disk time allocated to cgroup per device in milliseconds. First
140 two fields specify the major and minor number of the device and
141 third field specifies the disk time allocated to group in
145 Number of sectors transferred to/from disk by the group. First
146 two fields specify the major and minor number of the device and
147 third field specifies the number of sectors transferred by the
148 group to/from the device.
150 blkio.io_service_bytes
151 Number of bytes transferred to/from the disk by the group. These
152 are further divided by the type of operation - read or write, sync
153 or async. First two fields specify the major and minor number of the
154 device, third field specifies the operation type and the fourth field
155 specifies the number of bytes.
158 Number of IOs (bio) issued to the disk by the group. These
159 are further divided by the type of operation - read or write, sync
160 or async. First two fields specify the major and minor number of the
161 device, third field specifies the operation type and the fourth field
162 specifies the number of IOs.
164 blkio.io_service_time
165 Total amount of time between request dispatch and request completion
166 for the IOs done by this cgroup. This is in nanoseconds to make it
167 meaningful for flash devices too. For devices with queue depth of 1,
168 this time represents the actual service time. When queue_depth > 1,
169 that is no longer true as requests may be served out of order. This
170 may cause the service time for a given IO to include the service time
171 of multiple IOs when served out of order which may result in total
172 io_service_time > actual time elapsed. This time is further divided by
173 the type of operation - read or write, sync or async. First two fields
174 specify the major and minor number of the device, third field
175 specifies the operation type and the fourth field specifies the
176 io_service_time in ns.
179 Total amount of time the IOs for this cgroup spent waiting in the
180 scheduler queues for service. This can be greater than the total time
181 elapsed since it is cumulative io_wait_time for all IOs. It is not a
182 measure of total time the cgroup spent waiting but rather a measure of
183 the wait_time for its individual IOs. For devices with queue_depth > 1
184 this metric does not include the time spent waiting for service once
185 the IO is dispatched to the device but till it actually gets serviced
186 (there might be a time lag here due to re-ordering of requests by the
187 device). This is in nanoseconds to make it meaningful for flash
188 devices too. This time is further divided by the type of operation -
189 read or write, sync or async. First two fields specify the major and
190 minor number of the device, third field specifies the operation type
191 and the fourth field specifies the io_wait_time in ns.
194 Total number of bios/requests merged into requests belonging to this
195 cgroup. This is further divided by the type of operation - read or
196 write, sync or async.
199 Total number of requests queued up at any given instant for this
200 cgroup. This is further divided by the type of operation - read or
201 write, sync or async.
204 Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
205 The average queue size for this cgroup over the entire time of this
206 cgroup's existence. Queue size samples are taken each time one of the
207 queues of this cgroup gets a timeslice.
209 blkio.group_wait_time
210 Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
211 This is the amount of time the cgroup had to wait since it became busy
212 (i.e., went from 0 to 1 request queued) to get a timeslice for one of
213 its queues. This is different from the io_wait_time which is the
214 cumulative total of the amount of time spent by each IO in that cgroup
215 waiting in the scheduler queue. This is in nanoseconds. If this is
216 read when the cgroup is in a waiting (for timeslice) state, the stat
217 will only report the group_wait_time accumulated till the last time it
218 got a timeslice and will not include the current delta.
221 Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
222 This is the amount of time a cgroup spends without any pending
223 requests when not being served, i.e., it does not include any time
224 spent idling for one of the queues of the cgroup. This is in
225 nanoseconds. If this is read when the cgroup is in an empty state,
226 the stat will only report the empty_time accumulated till the last
227 time it had a pending request and will not include the current delta.
230 Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y.
231 This is the amount of time spent by the IO scheduler idling for a
232 given cgroup in anticipation of a better request than the existing ones
233 from other queues/cgroups. This is in nanoseconds. If this is read
234 when the cgroup is in an idling state, the stat will only report the
235 idle_time accumulated till the last idle period and will not include
239 Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. This
240 gives the statistics about how many a times a group was dequeued
241 from service tree of the device. First two fields specify the major
242 and minor number of the device and third field specifies the number
243 of times a group was dequeued from a particular device.
246 Recursive version of various stats. These files show the
247 same information as their non-recursive counterparts but
248 include stats from all the descendant cgroups.
250 Throttling/Upper limit policy files
251 -----------------------------------
252 blkio.throttle.read_bps_device
253 Specifies upper limit on READ rate from the device. IO rate is
254 specified in bytes per second. Rules are per device. Following is
257 echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
259 blkio.throttle.write_bps_device
260 Specifies upper limit on WRITE rate to the device. IO rate is
261 specified in bytes per second. Rules are per device. Following is
264 echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
266 blkio.throttle.read_iops_device
267 Specifies upper limit on READ rate from the device. IO rate is
268 specified in IO per second. Rules are per device. Following is
271 echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
273 blkio.throttle.write_iops_device
274 Specifies upper limit on WRITE rate to the device. IO rate is
275 specified in io per second. Rules are per device. Following is
278 echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
280 Note: If both BW and IOPS rules are specified for a device, then IO is
281 subjected to both the constraints.
283 blkio.throttle.io_serviced
284 Number of IOs (bio) issued to the disk by the group. These
285 are further divided by the type of operation - read or write, sync
286 or async. First two fields specify the major and minor number of the
287 device, third field specifies the operation type and the fourth field
288 specifies the number of IOs.
290 blkio.throttle.io_service_bytes
291 Number of bytes transferred to/from the disk by the group. These
292 are further divided by the type of operation - read or write, sync
293 or async. First two fields specify the major and minor number of the
294 device, third field specifies the operation type and the fourth field
295 specifies the number of bytes.
297 Common files among various policies
298 -----------------------------------
300 Writing an int to this file will result in resetting all the stats